Top Tips to Prevent Cable Pulling Hazards

Cable pulling entails numerous workplace hazards. If done incorrectly, workers might get seriously injured, and projects can take multiple steps in the wrong direction. Unless you have undergone proper training, wiring and cable installation jobs must be left to be done by the professionals. To ensure safety, you will want to use cable pulling tools instead. We have created a list of essential safety precautions below — take a look to ensure everyone’s safety, regardless of the job.

Choose the Proper Lubricant

If you do not use the correct lubricant or any lubricant – too much friction will occur and can limit how smoothly the conduit pulls. You should not use grease and oil lubricants on nonmetallic cables. There are plenty of other suitable compounds for polymer-coated ones. Use these if you want to ensure safety. The more careful you are with the lubricants you use, the better your experience will be.

Choose High-Quality Cable Rollers

Cable tray rollers
Obviously, you do not pull or roll cables with your bare hands. Hence, you would not want to select the appropriate tools for the job – cable rollers, to keep wires from dragging or pulling too tightly. The proper cable rollers can also help prevent cables from being bent. At Winch Hire Australia, we have a broad equipment range that will suit your needs.

Avoid Cable Bends

Bent cables are a guaranteed way to create an unsafe environment. You can approach this in several ways, including employing a sufficient number of rollers, using a conveyor with multiple rollers to avoid sharp bends, and providing proper tension in the various installation regions to avoid sharp bends. The list could go on and on. Either case, it’s up to you to keep an eye on the configuration and how the cables move. The higher your awareness of cable bending, the better your chances of keeping the job site safe.

Have a Plan In Case of Emergency

The most crucial safety guideline for cable pulling is to follow your emergency and general safety protocols. If you don’t provide your workers with enough cable pulling training, don’t warn them about the dangers of bent wires, and don’t explain the best lubricants – things will go wrong. Thus, no matter what the job entails, having emergency protocols in place is critical — ensure everyone knows the safety guidelines.

As we mentioned, Winch Hire Australia is the #1 destination for your cable pulling needs, but we also provide a lot more! Winches, chain hoists, compressors, equipment accessories – we have everything to maximise the efficiency of your project!

Disclaimer: This article is written for educational purposes. Make sure to consult with a manufacturer/supplier and conduct a job safety analysis before using the equipment. Use it for intended purposes only. Also, it is your responsibility to comply with relevant work health and safety laws.